Offshore Rig Equipment

Large-diameter conductor and drilling riser joints that connect the subsea or wellhead equipment to the rig floor, conveying drilling fluid returns and guiding the drill string through the water column. Configured with buoyancy, choke/kill lines, and tensioning to manage wave and current loads.

Annular diverter assemblies that route shallow gas and well returns away from the rig floor during the riserless or low-pressure drilling phases typical of jack-up operations. Includes diverter housings, packing elements, and overboard lines.

Pedestal-mounted marine cranes and associated sheaves, blocks, and rigging used to move pipe, equipment, and supply-boat cargo on the rig. Rated for dynamic offshore lift conditions and shock loading from vessel motion.

Mooring lines, anchor-handling wire rope, and anchorage wire rope that hold moored and tender-assisted units on station against wind, wave, and current. Selected by breaking strength, fatigue life, and corrosion protection.

Certified offshore baskets, half-height and full-height containers, and skips built and tested to DNV 2.7-1 for repeated lifting in the offshore environment. Fitted with certified padeyes, four-leg slings, and impact-rated frames.

Power, control, and instrumentation cables qualified for offshore and marine drilling service, including mud-resistant, flame-retardant, and drilling-rig grades. Rated to IEEE 1580 or NEK 606 for shipboard and offshore use.

Crown and traveling-block sheaves, fast-line and dead-line sheaves, and grooved wheels used in the hoisting system of offshore rigs. Sized to wire-rope diameter and rated for drilling line loads and reeving.

Jack-up legs, spud cans, cantilever skid systems, and modular drilling packages that form the structural and mechanical core of mobile offshore drilling units. Includes deck modules and substructures designed for transport, jacking, and re-rig.