Elbows & Tees
Request a Quote from these vendorsProduct Families
Butt-Weld Elbows
Beveled-end elbows joined to pipe by a full-penetration butt weld, supplied in 45-degree and 90-degree angles and in long-radius (1.5D) or short-radius (1.0D) configurations per ASME B16.9 and ASTM A234/A403.
Butt-Weld Tees
Beveled-end tee fittings that create a branch connection, available as equal (straight) tees where the branch matches the run and reducing tees where the branch is a smaller size, dimensioned to ASME B16.9.
Forged Socket-Weld Fittings
Compact high-pressure elbows and tees with recessed sockets that receive the pipe end for fillet welding, produced from forgings to ASME B16.11 and typically used in small-bore lines up to NPS 2.
Forged Threaded Fittings
Forged elbows and tees with tapered (NPT) female threads for screwed assembly without welding, rated to ASME B16.11 and BS 3799 and used in small-bore instrument, utility, and low-criticality service.
Corrosion-Resistant Alloy Fittings
Elbows, tees, and reducers in copper-nickel (CuNi), stainless steel, duplex, or nickel alloys selected for seawater, sour, or aggressive-media service where carbon steel is unsuitable.
Reducers
Fittings that transition pipe between two nominal sizes, supplied in concentric form for centerline-aligned runs and eccentric form to maintain a flat bottom or top of line for drainage and pump suction.
Long-Radius and Short-Radius Elbows
Directional elbows distinguished by centerline radius, with long-radius (1.5 times nominal diameter) used for lower flow turbulence and short-radius (1.0 times nominal diameter) used where space is restricted.
Stub Ends and Caps
Companion butt-weld fittings used with elbow and tee assemblies, including stub ends for lap-joint flange connections and caps for sealing pipe and header ends, dimensioned to ASME B16.9.
1 vendor listed here (filtered from 24)
Sign in to see the 1 vendors listed here
Specifications on this page are open to everyone. A free account shows you which vendors supply them, their models and part numbers, and lets you request a quote from several at once.
Create Free AccountAlready have an account? Log in