ESP Power Cables
Request a Quote from these vendorsProduct Families
Round ESP Power Cable
Three conductors cabled in a circular cross-section with armor over the assembly; used as the main run above the pump where tubing-to-casing clearance permits the larger round profile.
Flat ESP Power Cable
Three conductors arranged side by side in a flat profile to reduce radial thickness; used where annular clearance is tight or as the motor lead extension past the pump and intake.
Motor Lead Extension (MLE)
A short flat cable section, often with a plug-in pothead connector, that runs from the main cable splice past the pump and seal sections to land on the motor electrical connection.
Lead-Sheathed (Gas-Resistant) Cable
Cable with an extruded lead barrier over the insulation to block downhole gas, H2S, and CO2 migration; selected for sour, gassy, or high-decompression wells.
High-Temperature ESP Cable
Cable built with EPDM, polyimide, or PEEK-class insulation and metallic barriers rated for elevated bottomhole temperatures in deep, steamflood, or thermal-recovery wells.
VFD Power Cable (Surface)
Surface power cable rated for the high-frequency switching output of the variable frequency drive that feeds the downhole cable, sized to manage voltage drop and harmonic stress.
Cable Spoolers and Reels
Powered or manual spooling equipment, drums, and tensioning reels used to deploy, band, and retrieve ESP cable at controlled tension during rig-up and pull operations.
Cable Bands, Clamps and Splice Kits
Accessory components including stainless banding, protectors, and field splice or pothead kits that secure the cable to tubing and restore insulation integrity at joints.
18 vendors listed here (filtered from 20)
Sign in to see the 18 vendors listed here
Specifications on this page are open to everyone. A free account shows you which vendors supply them, their models and part numbers, and lets you request a quote from several at once.
Create Free AccountAlready have an account? Log in