ESP Wellhead Connectors
Request a Quote from these vendorsProduct Families
Cable Pack-Off Wellheads
Wellhead assemblies that seal directly around the flat or round ESP power cable using compression elastomer elements, allowing the unaltered cable to pass through the wellhead while holding annulus pressure.
Electric Feed-Through Mandrels
Penetrator assemblies in which the cable conductors terminate on the lower side and re-connect on the upper side through sealed, insulated pins, isolating the wellbore pressure from the surface electrical connection.
Wellhead Penetrators
Pressure-sealing electrical bulkheads with molded or glass-to-metal insulated conductors that pass three-phase power through the wellhead body while excluding well fluids from the conductor path.
Tubing Hanger ESP Systems
Tubing hangers that integrate the ESP cable pass-through or penetrator into the hanger body, suspending the tubing and cable while routing power through the hanger seal area.
Surface Electrical Connectors and Pothead Adapters
Connectors that mate the feed-through pins above the wellhead to the surface power cable, providing a sealed, serviceable electrical interface at the wellhead top.
Capillary and Instrument Penetrators
Sealed feed-throughs that carry small-diameter capillary lines, downhole gauge cables, or chemical-injection tubing through the wellhead alongside the ESP power connection.
Wellhead Sealing Elements and Pack-Off Kits
Replaceable elastomer pack-off elements, energizing rings, and seal kits used to re-energize the cable seal or refurbish the connector during workover.
3 vendors listed here (filtered from 7)
Sign in to see the 3 vendors listed here
Specifications on this page are open to everyone. A free account shows you which vendors supply them, their models and part numbers, and lets you request a quote from several at once.
Create Free AccountAlready have an account? Log in