Cementing Additives
Request a Quote from these vendorsProduct Families
Accelerators
Additives such as calcium chloride that shorten thickening and set time and increase early compressive strength, used in shallow, low-temperature wells where rapid set is needed.
Retarders
Chemicals such as lignosulfonates and organic acids that extend thickening time so slurries remain pumpable at high bottomhole temperatures and over long placement intervals.
Fluid-Loss Control Additives
Polymers and similar agents that limit loss of slurry water into permeable formations, preserving slurry properties and protecting the formation during placement.
Dispersants (Friction Reducers)
Additives that lower slurry viscosity and yield point to improve flow, enable turbulent-flow mud displacement, and reduce pumping pressure.
Extenders and Lightweight Additives
Materials such as bentonite and microsilica/amorphous silica that lower slurry density, increase yield, and reduce free water, allowing placement across weak formations with low fracture gradients.
Defoamers / Antifoam Agents
Additives that suppress air entrainment during mixing so the slurry achieves its designed density and avoids gas voids in the set cement.
Lost-Circulation Materials
Bridging and plugging solids added to seal thief zones and fractured or vugular formations that would otherwise cause loss of cement returns.
Anti-Gas-Migration and Stability Additives
Agents that reduce slurry permeability during the gel-to-set transition and limit free water and settling, preventing formation gas channeling and maintaining zonal isolation.
30 vendors listed here
Sign in to see the 30 vendors listed here
Specifications on this page are open to everyone. A free account shows you which vendors supply them, their models and part numbers, and lets you request a quote from several at once.
Create Free AccountAlready have an account? Log in