Pressure Pumping Services

High-horsepower pumping spreads—frac pumps, blenders, hydration and chemical units, and manifolds—that inject proppant-laden fluid above fracture pressure to create and prop open fractures in low-permeability formations. Fleets are sized in hydraulic horsepower and configured for staged, plug-and-perf completions.

Controlled-rate fluid pumping that conveys wireline-deployed plugs, perforating guns, and tools to depth in deviated and horizontal wells. Often paired with plug-and-perf operations to set isolation plugs and perforate the next stage.

Pumping of acid systems (commonly HCl or HCl/HF mud-acid blends) for matrix acidizing or acid fracturing to dissolve formation rock or near-wellbore damage and restore or increase permeability. Includes corrosion-inhibited blends and staged diversion.

Pumping of cryogenic or membrane-generated nitrogen for well unloading, fluid displacement, energized fracs, foam stimulation, and pressure testing. Used where lightweight, inert gas is needed to lift fluids or reduce hydrostatic load.

Mobile pumping units that mix and place cement slurry for primary casing cementing, squeeze jobs, and plug-back operations. Includes batch mixers, recirculating mixers, and high-pressure cement pumps for displacement.

Pump units that apply controlled pressure for hydrostatic testing, casing and cased-hole integrity tests, formation integrity tests (FIT), and leak-off tests (LOT). Verifies pressure containment of wellbore, casing, and surface equipment before further operations.

Heated-fluid pumping units that circulate hot oil, water, or treatment fluids to remove paraffin and hydrate deposits, warm production strings, and restore flow in production wells and flowlines.

Pumping services for water and chemical injection, disposal, displacement, and general high-volume fluid transfer between sources, tanks, and the wellbore. Supports completion, workover, and disposal-well operations.